===============================================================================
                           Installation Instructions
-------------------------------------------------------------------------------

Agilent ChemStation Rev. B.04.02 Driver Service Pack 3 (DSP3)

July 2010


I. Installation Instructions
------------------------------ 

*****************************IMPORTANT**************************************

Driver Service Pack 3 requires ChemStation B.04.02 Service Pack 1 (SP1) to
be installed.

****************************************************************************

1)     Startup your PC. 
	
       Launch Task Manager and verify that no applications are running. 

2)     Verify the instrument firmware requirements to be fulfilled
             
3)     Using the Windows Start button, select the Run or Start Search option.

4)     Type e:\install\setup.bat (where e is the letter of the optical drive).

5)     Follow the instructions of the Setup Wizard to install DSP3.




       The Driver Service Pack 3 can be obtained electronically from the
       Agilent Website:
 
	https://www.chem.agilent.com/scripts/cag_register.asp?
        Technical Support / Download&Utilites / ChemStation for Lc, LC/MS, GC,
        CE, CE-MS
        and then register with your license number of your instrument

	
       or can be ordered via your Agilent Representative, 
       Part number:
       G2070-60136 Agilent ChemStation B.04.02 Driver Service Pack 3 (DSP3)


     

II. Service Release Identification 
----------------------------------

Note that the revision code of ChemStation B.04.02 changes
  
	to

Agilent ChemStation B.04.02 SP1 [256]


III.  Qualification 
-------------------

Read the qualification.txt document for details of the recommended 
qualification procedure.